Epoxies and coatings

You can repair obstinate cracks in floors, walls and ceilings with our epoxies among other things. Cracks in concrete, mortar and stone disappear and the unit will be three times stronger than previously. Epoxies and coatings can be obtained as different types, ranging from mortar to liquids. Examples include Multipox and Coatapox.

Back to product overview

Updates and support

Poxycon

WATER-RESISTANT WEAR FOR CONCRETE, TILE FLOORS AND SCREEDS
    • Super strong wear layer.
    • Surpasses the concrete binding.
    • Does not fall to pieces due to freezing, is perfectly weather-resistant.
    Find a dealer
    Application images: 
    General info: 

    POXYCON's characteristics are determined by the special epoxy-resin agent. The product is placed as a wear layer on existing concrete or tile floors or screeds, with the adhesion surpassing the binding of the concrete itself (i.e. a break will occur in the concrete itself if an attempt is made to break the weld).
    Is vapour permeable and makes the surface slip-free; perfect weather resistance, does not fall to pieces due to freezing.

    Application information: 

    PROCESSING OF THE BASE:

    • Remove all loose and hollow sounding concrete parts thoroughly until a healthy, hard and solid base is produced.
    • Derust the possibly released reinforcement bars by hammering and sanding with a steel brush.
    • Remove dust from base thoroughly and if necessary degrease.

    APPLICATION OF POXYCON FLOOR BOND (BINDING AGENT LAYER):

    • Important! Mix the full packages of comp. A and comp. B with each other (a correct mixing ratio is very important).
    • Spread POXYCON BOND as a primer with a brush on pre-treated concrete.
    • Duration of use after mixing: approx. 30 min. at 180°C.
    • Low temperatures extend the duration of use; high temperatures shorten the duration of use.

    APPLICATION OF POXYCON:

    • The components are packed in the right ratio.
    • Stir comp. B into comp. A until the mass becomes homogeneous (± 1 min. Mixing time). Add comp. C while stirring and mix thoroughly (± 3 min. stirring time).
    • Mixing can be done using slow-moving rotary mixers (drill) or planetary mixers (Zyklos).
    • Duration of use after mixing: approx. 30 min.
    • Processing: apply POXYCON with a trowel or plasterer's square trowel in the still wet, recently applied POXYCON FLOOR BOND and level it.
    • Layer thickness: unlimited.
    Technical information: 

    Composition: is made up of 3 components: resin com. A: mixture of modified epoxy resins; hardener comp. B: polyamine hardener with regulating catalysts; filer comp. C: annealed, acid washed quartz granualte with well defined granule distribution.
    Pressure resistance: > 900 kg/cm².
    Tensile strength: > 80 kg/cm².
    Hardening through: completely shrinkage-free.
    Chemical resistance: resists acids, alkalis, oil, grease, petrol, solvents and (after 7 days) salt solutions; is resistant to aggressive vapours, gases and sea air; resists most chemical products.
    Specific gravity: approx. 2kg/dm³.
    Colour: unpigmented, sandy coloured.
    Hardening through time: can be walked and driven on after approx. 10 hours (20°C); fully hardened after approx. 36 hours (20°C).
    Heat resistance: +50°C to -30°C continuous.
    Flashpoint: in non-hardened state > 48°C.
    Shelf life: 12 months, keep dry, cool and frost-proof.
    Safety measures: consult the Safety Data Sheet.

    Productreferenties: 
    Article numberNamePackageContentUnitCategoryCertificates and safety information
    637119000
    Poxycon (3 comp.)
    24
    kg
    Epoxies and coatings
    637219000
    Poxycon Bond
    2,5
    kg
    Epoxies and coatings