Novabond 2

Adhesives and Sealants
Novabond 2

2K MS POLYMER FOR ELASTIC SEALING AND BONDING

Super-fast hardening: 1 hour.

Shrink-free, vibration-resistant, permanently flexible and strong.

Does not sag and is very easy to stack.

Weather and bacteria resistant.

Can be painted quickly - even with water-based paints.

View technical details
Available packages & colors

General info

Why is it perfect for experts?

Features

Novabond 2 is a hybrid polymers for bonding, sealing and joining. Because of its 2-component method, one can obtain fast internal polymerization, without shrinkage and independently of external influences like humidity. Both thick and thin layers cure quickly - even under water. Novabond 2 combines in 1 product the advantages of mounting adhesive, PU-glue, wood glue, silicone and sanitary sillicone kit, acrylic and butyl rubber kit, elastic jointing kits. Novabond 2 is weather resistant, is antifungal and bactericidal. Novabond 2 remains flexible, resists strong vibrations, is impact-resistant and torsionresistant. Novabond 2 is a nearly odourless, neutral system, which does not contain silicones, isocyanates or solvents.

Why use Novabond 2 ?

  • Can be used on: steel, stone, stainless steel, wood, aluminium, concrete, anodized aluminium, powder coated, lacquered, galvanized chromed and hot galvanized surfaces, brass surfaces, copper, ceramic material
  • It is advisable to be very careful with applications that obtain a high temperature as a result of the sun !!!

Instructions

  • Pump without mixing tip until the two components flow proportionately. 
  • Fit the mixing tip and spout ± 5 cm until you obtain a homogeneous colour. 
  • Apply on a clean and stable substrate; clean with Safety Clean and/or Multifoam if necessary. 

Novabond 2  can be removed with Safety Clean when still fresh. Remove mixing tip after use. Store with sealing caps back on. Processing time is ± 15 minutes. After ± 20 minutes of inactivity, replace mixing tip. Test before application on polycarbonate concerning adhesion and exclusion of tension cracks.

Technical information

Novabond 2
Adhesives and Sealants
Novabond 2

2K MS POLYMER FOR ELASTIC SEALING AND BONDING

  • Colour: black.
  • Operating temp, range at 50% R.H.: +5°C to +40°C.
  • Volume change - DIN 52451: +/- 10%.
  • Consistency: stable in joints up to 40 mm width.
  • Density at 23°C: component A: 1.37 g/cm³ +/- 0.03 g/ml; component B: 1.36 g/cm³ +/- 0.03 g/ml.
  • Operating time at 23°C, 50% R.H.: +/- 25-45 min.
  • Temp, resistance after curing: -40°C to +90°C -momentary to +120°C.
  • Hardness shore A - DIN 53505 storage at 23°C and 50% R.H.: after 4 hours: Shore A 15-20; after 7 days: Shore A 40-45 (100%).
  • Module at 100% elongation and +23°C - DIN 53504 S2 - storage 7 days at 23°C and 50% R.H.: +/- 0.7 N/mm².
  • Tensile strength DIN 53504 S2 - storage 7 days at 23°C and 50% R.H.: +/- 2.0 N/mm² - after 4 hours already 50% of the tensile strength is obtained.
  • Elongation after fracture: +/- 500%.
  • Adherence: bonding is possible on most surfaces -even smooth surfaces- without using a primer.
  • Chemical resistance: good: diluted acids, alkali, aliphatic solvents, oils, greases, water and seawater; moderate: esters, ketonen and aromatics; bad: concentrated acids, chlorinated solvents.
  • Shelf life: 12 months in a closed and Original packing at +5°C and +25°C - in a cool, dry, frost-free place.
  • Safety measures: consult the Safety Data Sheet.